Force10 Networks Force10 User Manual download pdf (Page 83)

Installing and Maintaining the E1200i System 83

interface

management port

config 100m

interface

management port

config 10m

interface

management port

config

auto-negotiate

interface

management port

config no

auto-negotiate

interface

management port

config full-duplex

interface

management port

config half-duplex

interface

management port

config show

• (OPTIONAL) Use these commands to set the speed and duplex settings

for the Management interface.The default setting is full-duplex and

auto-negotiation.

•Use the

interface management port config show command to

view the Management interface’s physical settings.

show interface

management

ethernet

interface

management

ethernet ip

address ip-address

ip-address-mask

• Use the show interface management ethernet command to

display the IP address and network mask of the management Ethernet

port.

•If the

show command output does not display configured IP address

information, use the

interface management ethernet ip

address ip-address ip-address-mask

command to set the IP

address of the Management Ethernet port for network (ftp/tftp) operating

system boot.

Step Command Task (continued)

BOOT_USER # boot change primary

'.' = clear field; '-' = go to previous field

boot device : flash

file name : /E1200-3.x.bin

BOOT_USER # boot change default

'.' = clear field; '-' = go to previous field

boot device : flash

file name : /E1200-3.x.bin

BOOT_USER #

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 104 105

Comments to this Manuals

No comments

Force10 Networks Force10 User Manual Page 83

Comments to this Manuals

Related products and manuals for Networking Force10 Networks Force10