Force10-networks C-Series User Manual download pdf

101-00310-02

C-Series FlexMedia Card: 36 Ports 10/100/1000 Base-T

Ethernet (PoE and non-PoE), 8 Ports 1G, 2 Ports 10G

Feature Highlights and Installation Instructions

Feature Highlights

• There are two versions of the FlexMedia card, differing only in Power over Ethernet (PoE) support:

• Catalog # LC-CB-10G-1G-36V (c

ard type E36VB): PoE support to 15.4 Watts/port on 10/100/1000 ports

• Catalog # LC-CB-10G-1G-36T (ca

rd type E36TB): non-PoE

• 36 ports with RJ-45 connectors support auto-negotiat

ion or 10/100/1000 Base-T speed, full and half duplex.

• 8 ports use approved 1G Small-form F

actor Pluggable (SFP) optical transceivers.

• 2 ports use approved 10G Small-form Factor Pl

uggable (SFP+) optical transceivers.

• SFP+ ports support SR and LR media modules (only Force

10-specific modules are recognized by the card.).

Note: FTOS 7.7.1.0 does not allow non-qualified SFP+ modules, which can cause board damage.

• The CB series line cards support th

e following CAM configurations:

• 12K Layer 3 IP forward information base (FIB)

• 16K Layer 2 FIB

• 768 Layer 2 access control list (ACL) entries

• 768 Layer 3 access control list (ACL) entries

• Support for online insertion and removal (OIR) of line card.

• Support for ingress Layer 2 and Layer 3 ACL processing across all ports.

Installation Notes:

• The chassis into which this line card is installed

must be running FTOS version 7.7.1.0 or later

and boot code 2.6.0.2 or later.

• Only the non-PoE version of the card works in a DC-powered chassis.

LED Description

10/100/1000Base-T Green blinking: Link detected/activity

Green solid: Link detected/no activity

Off: No link/card offline

Amber solid: 1G speed

Amber blinking: 100M speed

Off: 10M speed

1000Base-X Green: Operational/no activity

Green blinking: activity

Off: No link/card offline

Green: On

100Base-FX Green: Operational/no activity

Green blinking: activity

Off: No link/card offline

Yellow: On

Card Status LED Green: operational

Green blinking: booting/ diagnostics

Red: card problem

Unlit: in standby mode or power is off

Port Type Link Status (Left Side LED) Speed (Right Side LED)

1 2 3 4 5

Summary of Contents

Page 1 - LED Description

101-00310-02C-Series FlexMedia Card: 36 Ports 10/100/1000 Base-T Ethernet (PoE and non-PoE), 8 Ports 1G, 2 Ports 10GFeature Highlights and Installatio

Page 2 - Installing the Line Card

2 101-00310-01Installing the Line Card• The C-Series chassis requires at least one line card to operate.• You can add, replace, or remove C-Series lin

Page 3

Caution: Unlock the levers before inserting the line card into the chassis. Fully engage the locking mechanism once the card has been inserted; not do

Page 4

4 101-00310-014 Continue sliding the line card until you feel the connectors engage with the chassis backplane. 5 Rotate the levers towards the card t

Page 5 - Removing Line Cards

101-00310-01 5Removing Line Cards1 Unplug the network interface cables connected to the line card.2 Extend the left and right card levers by first pre

Comments to this Manuals

No comments

Force10-networks C-Series User Manual

Browse online or download User Manual for Hardware Force10-networks C-Series. Force10 Networks C-Series User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Force10-networks C-Series